How To Properly Store Spray Foam Products Checklist



  • Store at room temperature (60°-90°F / 16°-32°C) in a dry area.
    • Do not expose products to open flame or temperatures above 120°F (49°C) as storage above 120° F (49°C) may result in chemical leakage due to excessive pressures. Do not store near open flames or other sources of heat or ignition. Pressurized cylinders have a safety rupture disk which will relieve excessive pressure; however, chemical leakage will occur when the disk ruptures.
    • Storage below 60° F (16° C) may result in crystallization of liquid components and affect the quality of the finished product.
  • Cylinders and contents must be brought to between 70°-90°F (21°-32°C) for use. This normally requires 36 to 72 hours at room temperature after the initial use of the product.
  • When not in use, turn the valves into their OFF position.
  • Do not drain the chemical from the hoses.
  • Click the safety on the applicator gun into the LOCKED position.
  • Remove the old nozzle, but do not throw away. Clean the end of the gun to ensure the chemical exits are not obstructed.
  • Apply fresh lubricant to the end of the gun. Reattach the old nozzle, which, clogged with foam, will keep air and moisture out of the lines.
  • Remaining contents must be used within 30 days of the date of initial application.
  • After every 7 days without use, dispense a small amount of chemical and clean to prevent crystallization from occurring in the hoses.